GLADEN PICO 6 | 8 OEM-DSP - perfect OEM integration:

• Powerful compact power amplifier optimized for use on the factory radio.
• Six analog inputs up to 30V, flexible routing, 3x input EQ and delay.
• With 4x50Wrms + 2x 90 / 120Wrms ideal for active and partially active systems, as well as classic front + rear + sub applications.
• With two digital inputs (SP-Dif and BT +) and two processed line-out, it is ready for the future.

Technical specifications:

Power:

• 4x 50 Wrms at 4 Ohm (cannot be bridged!)
• 2x 90 Wrms at 4 Ohm (2x120Wrms at 2 Ohm) or
• 1x 240Wrms at 4 ohms
• 2x 2Vrms line outputs

Dimensions: 150x133x45 mm

Function overview PICO 6 | 8 OEM-DSP

hardware

Entry page:

• 4x analog inputs symmetrical (high-level) up to 30V.
• 2x analog inputs switchable high-level / low-level)
• 1x digital input SP-Dif optical (8kHz - 96kHz sampling rate)
• 1x Bluetooth port with SP-Dif - TTL (8kHz - 96kHz, e.g. for Mos_BTS Bluetooth streaming module) or Bluetooth extended digital audio port (BT +)
• (flexible 8kHz - 384kHz synchronous digital input for audio sources with 2 - 16 channels, direct DSP access without jitter, e.g. for MOS BTS96k BT streaming module or extended analog inputs)

DSP part:

• 294.912 MHz, 32-bit audio port, 64-bit core.
• Double Precision 56Bit filter calculation.
• 6144 SIMD instructions per sample at 48 kHz.
• ASRCs from 1: 8 up to 7.75: 1 ratio and 139 dB DNR.

Exit page:

• 4x 50W loudspeaker output 3-ohm stable (cannot be bridged!)
• 2x 90W loudspeaker output 2-Ohm stable / bridgeable
• 2x 2Vrms line outputs
• 1x digital output optical (48kHz / 24Bit, fully masterable)

Control:

• 1x remote connector (analog, for RTC.2 potentiometer remote control)
• 1x Bluetooth control port (connection MOS-BT3.0 (app control), RC-Can (CAN bus control), MOS_USB2.0 (programming dongle)
• 1x remote out, 1x remote in, auto-remote with high-level connection.

Connections with MOLEX plug contacts.

• Very small size with little heat generation, ideally suited for installation behind cladding.

software

• 3x 9 band parametric input EQ (de-equalizing)
• 6x input delay 0 - 3ms / 0.01ms (De-Delay)
• 10x input level control digital (signal conditioning)
• Flexible mixer for signal routing
• (Separated sides, can add and subtract, 10 inputs on 4x2 output groups)

• 6x 30 band or 4x30 band + 2x15 band group EQ

• (parametric, relative phase remains stable)
• 12x 10 band output filters
• HighPass / LowPass / HighShelf / LowShelf / Notch / Allpass 1st + 2nd order / Speaker-EQ)
• 12x speaker delay 0 - 12ms, 0.02ms
• 12x speaker phase switch.